NF T 47-501 French Metric O-Ring Sizes & Tolerances

NF T 47-501 is the French national standard for metric O-rings, closely aligned with ISO 3601-1. It defines inside diameters, cross-sections and dimensional tolerances across two precision classes — aerospace (tight) and general industrial — plus visual inspection acceptance classes for surface and molding defects. Engineers use it to spec a size, precision class and inspection level with confidence; ARC molds every NF T 47-501 size to your compound, hardness and class.

Request a Quote Standard O-Rings →

Using the NF T 47-501 chart to spec your metric O-ring

NF T 47-501 is the French national standard for metric O-rings, closely aligned with ISO 3601-1. Engineers and buyers reach for this chart when a print calls out an NF T 47-501 size or when they need to cross-reference a French metric O-ring to an ISO 3601 equivalent. Read across the table to pin down the inside diameter and cross-section, then choose your precision class — aerospace-tight or general industrial — and the visual inspection acceptance class that governs allowable surface and molding defects. That combination of size, precision class and inspection grade is what fully defines the part you need to source.

ARC molds every NF T 47-501 size to your specification — you pick the compound and hardness, we match the precision and inspection class your application demands. As a US custom manufacturer certified to ISO 9001:2015 and IATF 16949:2016, we support a wide range of elastomers for temperature, chemical and pressure requirements. Send your size or drawing and our engineers return a material recommendation and quote, usually within one business day.

NF T 47-501 Metric O-Rings

NFT 47-501 is issued by the Association Française de Normalisation (French Standards Institute). It is very similar to ISO 3601-1 in both the sizes included and the size reference. The size reference codes are designated with a letter corresponding to each of 5 cross section groups (A-E), 4 digits indicating ID (rounded to 0.1 mm), a 2nd letter indicating Precision Class and a 3rd letter indicating Visual (inspection) Class. The Precision Class is indicated by the letter A (for Aerospace applications) or G (for General Purpose applications). The visual classes are N (1.0 AQL) and S (.65 AQL).

For a complete listing of all metric o-ring sizes, visit our Metric O-Ring Cross Reference Table.

NF T 47-501 Size Chart

Global Part#	Reference	C/S (MM)	I.D. (MM)	C/S (Inch)	I.D. (Inch)
1.80X001.8	A0018	1.8	1.8	0.071	0.071
1.80X002	A0020	1.8	2	0.071	0.079
1.80X002.24	A0022	1.8	2.24	0.071	0.088
1.80X002.5	A0025	1.8	2.5	0.071	0.098
1.80X002.8	A0028	1.8	2.8	0.071	0.11
1.80X003.15	A0032	1.8	3.15	0.071	0.124
1.80X003.55	A0036	1.8	3.55	0.071	0.14
1.80X003.75	A0038	1.8	3.75	0.071	0.148
1.80X004	A0040	1.8	4	0.071	0.157
1.80X004.5	A0045	1.8	4.5	0.071	0.177
1.80X004.75	A0048	1.8	4.75	0.071	0.187
1.80X004.87	A0049	1.8	4.87	0.071	0.192
1.80X005	A0050	1.8	5	0.071	0.197
1.80X005.15	A0052	1.8	5.15	0.071	0.203
1.80X005.3	A0053	1.8	5.3	0.071	0.209
1.80X005.6	A0056	1.8	5.6	0.071	0.22
1.80X006	A0060	1.8	6	0.071	0.236
1.80X006.3	A0063	1.8	6.3	0.071	0.248
1.80X006.7	A0067	1.8	6.7	0.071	0.264
1.80X006.9	A0069	1.8	6.9	0.071	0.272
1.80X007.1	A0071	1.8	7.1	0.071	0.28
1.80X007.5	A0075	1.8	7.5	0.071	0.295
1.80X008	A0080	1.8	8	0.071	0.315
1.80X008.5	A0085	1.8	8.5	0.071	0.335
1.80X008.75	A0088	1.8	8.75	0.071	0.344
1.80X009	A0090	1.8	9	0.071	0.354
1.80X009.5	A0095	1.8	9.5	0.071	0.374
1.80X010	A0100	1.8	10	0.071	0.394
1.80X010.6	A0106	1.8	10.6	0.071	0.417
1.80X011.2	A0112	1.8	11.2	0.071	0.441
1.80X011.6	A0116	1.8	11.6	0.071	0.457
1.80X011.8	A0118	1.8	11.8	0.071	0.465
1.80X012.1	A0121	1.8	12.1	0.071	0.476
1.80X012.5	A0125	1.8	12.5	0.071	0.492
1.80X012.8	A0128	1.8	12.8	0.071	0.504
1.80X013.2	A0132	1.8	13.2	0.071	0.52
1.80X014	A0140	1.8	14	0.071	0.551
1.80X014.5	A0145	1.8	14.5	0.071	0.571
1.80X015	A0150	1.8	15	0.071	0.591
1.80X015.5	A0155	1.8	15.5	0.071	0.61
1.80X016	A0160	1.8	16	0.071	0.63
1.80X017	A0170	1.8	17	0.071	0.669
1.80X018	A0180	1.8	18	0.071	0.709
1.80X019	A0190	1.8	19	0.071	0.748
1.80X020	A0200	1.8	20	0.071	0.787
1.80X020.6	A0206	1.8	20.6	0.071	0.811
1.80X021.2	A0212	1.8	21.2	0.071	0.835
1.80X022.4	A0224	1.8	22.4	0.071	0.882
1.80X023.6	A0236	1.8	23.6	0.071	0.929
1.80X024.3	A0243	1.8	24.3	0.071	0.957
1.80X025	A0250	1.8	25	0.071	0.984
1.80X025.8	A0258	1.8	25.8	0.071	1.016
1.80X026.5	A0265	1.8	26.5	0.071	1.043
1.80X027.3	A0273	1.8	27.3	0.071	1.075
1.80X028	A0280	1.8	28	0.071	1.102
1.80X030	A0300	1.8	30	0.071	1.181
1.80X031.5	A0315	1.8	31.5	0.071	1.24
1.80X032.5	A0325	1.8	32.5	0.071	1.28
1.80X033.5	A0335	1.8	33.5	0.071	1.319
1.80X034.5	A0345	1.8	34.5	0.071	1.358
1.80X035.5	A0355	1.8	35.5	0.071	1.398
1.80X036.5	A0365	1.8	36.5	0.071	1.437
1.80X037.5	A0375	1.8	37.5	0.071	1.476
1.80X038.7	A0387	1.8	38.7	0.071	1.524
1.80X040	A0400	1.8	40	0.071	1.575
1.80X041.2	A0412	1.8	41.2	0.071	1.622
1.80X042.5	A0425	1.8	42.5	0.071	1.673
1.80X043.7	A0437	1.8	43.7	0.071	1.72
1.80X045	A0450	1.8	45	0.071	1.772
1.80X046.2	A0462	1.8	46.2	0.071	1.819
1.80X047.5	A0475	1.8	47.5	0.071	1.87
1.80X048.7	A0487	1.8	48.7	0.071	1.917
1.80X050	A0500	1.8	50	0.071	1.969
2.65X009	B0090	2.65	9	0.104	0.354
2.65X009.5	B0095	2.65	9.5	0.104	0.374
2.65X010	B0100	2.65	10	0.104	0.394
2.65X010.6	B0106	2.65	10.6	0.104	0.417
2.65X011.2	B0112	2.65	11.2	0.104	0.441
2.65X011.6	B0116	2.65	11.6	0.104	0.457
2.65X011.8	B0118	2.65	11.8	0.104	0.465
2.65X012.1	B0121	2.65	12.1	0.104	0.476
2.65X012.5	B0125	2.65	12.5	0.104	0.492
2.65X012.8	B0128	2.65	12.8	0.104	0.504
2.65X013.2	B0132	2.65	13.2	0.104	0.52
2.65X014	B0140	2.65	14	0.104	0.551
2.65X014.5	B0145	2.65	14.5	0.104	0.571
2.65X015	B0150	2.65	15	0.104	0.591
2.65X016	B0160	2.65	16	0.104	0.63
2.65X017	B0170	2.65	17	0.104	0.669
2.65X018	B0180	2.65	18	0.104	0.709
2.65X019	B0190	2.65	19	0.104	0.748
2.65X020	B0200	2.65	20	0.104	0.787
2.65X020.6	B0206	2.65	20.6	0.104	0.811
2.65X021.2	B0212	2.65	21.2	0.104	0.835
2.65X022.4	B0224	2.65	22.4	0.104	0.882
2.65X023.6	B0236	2.65	23.6	0.104	0.929
2.65X024.3	B0243	2.65	24.3	0.104	0.957
2.65X025	B0250	2.65	25	0.104	0.984
2.65X025.8	B0258	2.65	25.8	0.104	1.016
2.65X026.5	B0265	2.65	26.5	0.104	1.043
2.65X027.3	B0273	2.65	27.3	0.104	1.075
2.65X028	B0280	2.65	28	0.104	1.102
2.65X030	B0300	2.65	30	0.104	1.181
2.65X031.5	B0315	2.65	31.5	0.104	1.24
2.65X032.5	B0325	2.65	32.5	0.104	1.28
2.65X033.5	B0335	2.65	33.5	0.104	1.319
2.65X034.5	B0345	2.65	34.5	0.104	1.358
2.65X035.5	B0355	2.65	35.5	0.104	1.398
2.65X036.5	B0365	2.65	36.5	0.104	1.437
2.65X037.5	B0375	2.65	37.5	0.104	1.476
2.65X038.7	B0387	2.65	38.7	0.104	1.524
2.65X040	B0400	2.65	40	0.104	1.575
2.65X041.2	B0412	2.65	41.2	0.104	1.622
2.65X042.5	B0425	2.65	42.5	0.104	1.673
2.65X043.7	B0437	2.65	43.7	0.104	1.72
2.65X045	B0450	2.65	45	0.104	1.772
2.65X046.2	B0462	2.65	46.2	0.104	1.819
2.65X047.5	B0475	2.65	47.5	0.104	1.87
2.65X048.7	B0487	2.65	48.7	0.104	1.917
2.65X050	B0500	2.65	50	0.104	1.969
2.65X051.5	B0515	2.65	51.5	0.104	2.028
2.65X053	B0530	2.65	53	0.104	2.087
2.65X054.5	B0545	2.65	54.5	0.104	2.146
2.65X056	B0560	2.65	56	0.104	2.205
2.65X058	B0580	2.65	58	0.104	2.283
2.65X060	B0600	2.65	60	0.104	2.362
2.65X061.5	B0615	2.65	61.5	0.104	2.421
2.65X063	B0630	2.65	63	0.104	2.48
2.65X065	B0650	2.65	65	0.104	2.559
2.65X067	B0670	2.65	67	0.104	2.638
2.65X069	B0690	2.65	69	0.104	2.717
2.65X071	B0710	2.65	71	0.104	2.795
2.65X073	B0730	2.65	73	0.104	2.874
2.65X075	B0750	2.65	75	0.104	2.953
2.65X077.5	B0775	2.65	77.5	0.104	3.051
2.65X080	B0800	2.65	80	0.104	3.15
2.65X082.5	B0825	2.65	82.5	0.104	3.248
2.65X085	B0850	2.65	85	0.104	3.346
2.65X087.5	B0875	2.65	87.5	0.104	3.445
2.65X090	B0900	2.65	90	0.104	3.543
2.65X092.5	B0925	2.65	92.5	0.104	3.642
2.65X095	B0950	2.65	95	0.104	3.74
2.65X097.5	B0975	2.65	97.5	0.104	3.839
2.65X100	B1000	2.65	100	0.104	3.937
3.55X014	C0140	3.55	14	0.14	0.551
3.55X014.5	C0145	3.55	14.5	0.14	0.571
3.55X015	C0150	3.55	15	0.14	0.591
3.55X015.5	C0155	3.55	15.5	0.14	0.61
3.55X016	C0160	3.55	16	0.14	0.63
3.55X017	C0170	3.55	17	0.14	0.669
3.55X018	C0180	3.55	18	0.14	0.709
3.55X019	C0190	3.55	19	0.14	0.748
3.55X040	C0400	3.55	40	0.14	1.575
3.55X041.2	C0412	3.55	41.2	0.14	1.622
3.55X042.5	C0425	3.55	42.5	0.14	1.673
3.55X043.7	C0437	3.55	43.7	0.14	1.72
3.55X045	C0450	3.55	45	0.14	1.772
3.55X046.2	C0462	3.55	46.2	0.14	1.819
3.55X047.5	C0475	3.55	47.5	0.14	1.87
3.55X048.7	C0487	3.55	48.7	0.14	1.917
3.55X060	C0600	3.55	60	0.14	2.362
3.55X061.5	C0615	3.55	61.5	0.14	2.421
3.55X063	C0630	3.55	63	0.14	2.48
3.55X065	C0650	3.55	65	0.14	2.559
3.55X067	C0670	3.55	67	0.14	2.638
3.55X069	C0690	3.55	69	0.14	2.717
3.55X071	C0710	3.55	71	0.14	2.795
3.55X073	C0730	3.55	73	0.14	2.874
3.55X075	C0750	3.55	75	0.14	2.953
3.55X077.5	C0775	3.55	77.5	0.14	3.051
3.55X080	C0800	3.55	80	0.14	3.15
3.55X082.5	C0825	3.55	82.5	0.14	3.248
3.55X085	C0850	3.55	85	0.14	3.346
3.55X087.5	C0875	3.55	87.5	0.14	3.445
3.55X090	C0900	3.55	90	0.14	3.543
3.55X092.5	C0925	3.55	92.5	0.14	3.642
3.55X095	C0950	3.55	95	0.14	3.74
3.55X097.5	C0975	3.55	97.5	0.14	3.839
3.55X100	C1000	3.55	100	0.14	3.937
3.55X103	C1030	3.55	103	0.14	4.055
3.55X106	C1060	3.55	106	0.14	4.173
3.55X109	C1090	3.55	109	0.14	4.291
3.55X112	C1120	3.55	112	0.14	4.409
3.55X115	C1150	3.55	115	0.14	4.528
3.55X118	C1180	3.55	118	0.14	4.646
3.55X122	C1220	3.55	122	0.14	4.803
3.55X125	C1250	3.55	125	0.14	4.921
3.55X128	C1280	3.55	128	0.14	5.039
3.55X132	C1320	3.55	132	0.14	5.197
3.55X136	C1360	3.55	136	0.14	5.354
3.55X140	C1400	3.55	140	0.14	5.512
3.55X145	C1450	3.55	145	0.14	5.709
3.55X150	C1500	3.55	150	0.14	5.906
3.55X155	C1550	3.55	155	0.14	6.102
3.55X160	C1600	3.55	160	0.14	6.299
3.55X165	C1650	3.55	165	0.14	6.496
3.55X170	C1700	3.55	170	0.14	6.693
3.55X175	C1750	3.55	175	0.14	6.89
3.55X180	C1800	3.55	180	0.14	7.087
3.55X185	C1850	3.55	185	0.14	7.283
3.55X190	C1900	3.55	190	0.14	7.48
3.55X195	C1950	3.55	195	0.14	7.677
3.55X200	C2000	3.55	200	0.14	7.874
3.55X020	CO200	3.55	20	0.14	0.787
3.55X020.6	CO206	3.55	20.6	0.14	0.811
3.55X021.2	CO212	3.55	21.2	0.14	0.835
3.55X022.4	CO224	3.55	22.4	0.14	0.882
3.55X023.6	CO236	3.55	23.6	0.14	0.929
3.55X024.3	CO243	3.55	24.3	0.14	0.957
3.55X025	CO250	3.55	25	0.14	0.984
3.55X025.8	CO258	3.55	25.8	0.14	1.016
3.55X026.5	CO265	3.55	26.5	0.14	1.043
3.55X027.3	CO273	3.55	27.3	0.14	1.075
3.55X028	CO280	3.55	28	0.14	1.102
3.55X030	CO300	3.55	30	0.14	1.181
3.55X031.5	CO315	3.55	31.5	0.14	1.24
3.55X032.5	CO325	3.55	32.5	0.14	1.28
3.55X033.5	CO335	3.55	33.5	0.14	1.319
3.55X034.5	CO345	3.55	34.5	0.14	1.358
3.55X035.5	CO355	3.55	35.5	0.14	1.398
3.55X036.5	CO365	3.55	36.5	0.14	1.437
3.55X037.5	CO375	3.55	37.5	0.14	1.476
3.55X038.7	CO387	3.55	38.7	0.14	1.524
3.55X050	CO500	3.55	50	0.14	1.969
3.55X051.5	CO515	3.55	51.5	0.14	2.028
3.55X053	CO530	3.55	53	0.14	2.087
3.55X054.5	CO545	3.55	54.5	0.14	2.146
3.55X056	CO560	3.55	56	0.14	2.205
3.55X058	CO580	3.55	58	0.14	2.283
5.30X037.5	D0375	5.3	37.5	0.209	1.476
5.30X038.7	D0387	5.3	38.7	0.209	1.524
5.30X040	D0400	5.3	40	0.209	1.575
5.30X041.2	D0412	5.3	41.2	0.209	1.622
5.30X042.5	D0425	5.3	42.5	0.209	1.673
5.30X043.7	D0437	5.3	43.7	0.209	1.72
5.30X045	D0450	5.3	45	0.209	1.772
5.30X046.2	D0462	5.3	46.2	0.209	1.819
5.30X047.5	D0475	5.3	47.5	0.209	1.87
5.30X048.7	D0487	5.3	48.7	0.209	1.917
5.30X050	D0500	5.3	50	0.209	1.969
5.30X051.5	D0515	5.3	51.5	0.209	2.028
5.30X053	D0530	5.3	53	0.209	2.087
5.30X054.5	D0545	5.3	54.5	0.209	2.146
5.30X056	D0560	5.3	56	0.209	2.205
5.30X058	D0580	5.3	58	0.209	2.283
5.30X060	D0600	5.3	60	0.209	2.362
5.30X061.5	D0615	5.3	61.5	0.209	2.421
5.30X063	D0630	5.3	63	0.209	2.48
5.30X065	D0650	5.3	65	0.209	2.559
5.30X067	D0670	5.3	67	0.209	2.638
5.30X069	D0690	5.3	69	0.209	2.717
5.30X071	D0710	5.3	71	0.209	2.795
5.30X073	D0730	5.3	73	0.209	2.874
5.30X075	D0750	5.3	75	0.209	2.953
5.30X077.5	D0775	5.3	77.5	0.209	3.051
5.30X080	D0800	5.3	80	0.209	3.15
5.30X082.5	D0825	5.3	82.5	0.209	3.248
5.30X085	D0850	5.3	85	0.209	3.346
5.30X087.5	D0875	5.3	87.5	0.209	3.445
5.30X090	D0900	5.3	90	0.209	3.543
5.30X092.5	D0925	5.3	92.5	0.209	3.642
5.30X095	D0950	5.3	95	0.209	3.74
5.30X097.5	D0975	5.3	97.5	0.209	3.839
5.30X100	D1000	5.3	100	0.209	3.937
5.30X103	D1030	5.3	103	0.209	4.055
5.30X106	D1060	5.3	106	0.209	4.173
5.30X109	D1090	5.3	109	0.209	4.291
5.30X112	D1120	5.3	112	0.209	4.409
5.30X115	D1150	5.3	115	0.209	4.528
5.30X118	D1180	5.3	118	0.209	4.646
5.30X122	D1220	5.3	122	0.209	4.803
5.30X125	D1250	5.3	125	0.209	4.921
5.30X128	D1280	5.3	128	0.209	5.039
5.30X132	D1320	5.3	132	0.209	5.197
5.30X136	D1360	5.3	136	0.209	5.354
5.30X140	D1400	5.3	140	0.209	5.512
5.30X145	D1450	5.3	145	0.209	5.709
5.30X150	D1500	5.3	150	0.209	5.906
5.30X155	D1550	5.3	155	0.209	6.102
5.30X160	D1600	5.3	160	0.209	6.299
5.30X165	D1650	5.3	165	0.209	6.496
5.30X170	D1700	5.3	170	0.209	6.693
5.30X172.5	D1725	5.3	172.5	0.209	6.791
5.30X175	D1750	5.3	175	0.209	6.89
5.30X177.5	D1775	5.3	177.5	0.209	6.988
5.30X180	D1800	5.3	180	0.209	7.087
5.30X182.5	D1825	5.3	182.5	0.209	7.185
5.30X185	D1850	5.3	185	0.209	7.283
5.30X187.5	D1875	5.3	187.5	0.209	7.382
5.30X190	D1900	5.3	190	0.209	7.48
5.30X195	D1950	5.3	195	0.209	7.677
5.30X200	D2000	5.3	200	0.209	7.874
5.30X203	D2030	5.3	203	0.209	7.992
5.30X206	D2060	5.3	206	0.209	8.11
5.30X212	D2120	5.3	212	0.209	8.346
5.30X218	D2180	5.3	218	0.209	8.583
5.30X224	D2240	5.3	224	0.209	8.819
5.30X230	D2300	5.3	230	0.209	9.055
5.30X236	D2360	5.3	236	0.209	9.291
5.30X239	D2390	5.3	239	0.209	9.409
5.30X243	D2430	5.3	243	0.209	9.567
5.30X250	D2500	5.3	250	0.209	9.843
5.30X254	D2540	5.3	254	0.209	10
5.30X258	D2580	5.3	258	0.209	10.157
5.30X261	D2610	5.3	261	0.209	10.276
5.30X265	D2650	5.3	265	0.209	10.433
5.30X268	D2680	5.3	268	0.209	10.551
5.30X272	D2720	5.3	272	0.209	10.709
5.30X276	D2760	5.3	276	0.209	10.866
5.30X280	D2800	5.3	280	0.209	11.024
5.30X283	D2830	5.3	283	0.209	11.142
5.30X286	D2860	5.3	286	0.209	11.26
5.30X290	D2900	5.3	290	0.209	11.417
5.30X295	D2950	5.3	295	0.209	11.614
5.30X300	D3000	5.3	300	0.209	11.811
5.30X303	D3030	5.3	303	0.209	11.929
5.30X307	D3070	5.3	307	0.209	12.087
5.30X311	D3110	5.3	311	0.209	12.244
5.30X315	D3150	5.3	315	0.209	12.402
5.30X320	D3200	5.3	320	0.209	12.598
5.30X325	D3250	5.3	325	0.209	12.795
5.30X330	D3300	5.3	330	0.209	12.992
5.30X335	D3350	5.3	335	0.209	13.189
5.30X340	D3400	5.3	340	0.209	13.386
5.30X345	D3450	5.3	345	0.209	13.583
5.30X350	D3500	5.3	350	0.209	13.78
5.30X355	D3550	5.3	355	0.209	13.976
5.30X360	D3600	5.3	360	0.209	14.173
5.30X365	D3650	5.3	365	0.209	14.37
5.30X370	D3700	5.3	370	0.209	14.567
5.30X375	D3750	5.3	375	0.209	14.764
5.30X379	D3790	5.3	379	0.209	14.921
5.30X383	D3830	5.3	383	0.209	15.079
5.30X387	D3870	5.3	387	0.209	15.236
5.30X391	D3910	5.3	391	0.209	15.394
5.30X395	D3950	5.3	395	0.209	15.551
5.30X400	D4000	5.3	400	0.209	15.748
7.00X109	E1090	7	109	0.276	4.291
7.00X112	E1120	7	112	0.276	4.409
7.00X115	E1150	7	115	0.276	4.528
7.00X118	E1180	7	118	0.276	4.646
7.00X122	E1220	7	122	0.276	4.803
7.00X125	E1250	7	125	0.276	4.921
7.00X128	E1280	7	128	0.276	5.039
7.00X132	E1320	7	132	0.276	5.197
7.00X136	E1360	7	136	0.276	5.354
7.00X140	E1400	7	140	0.276	5.512
7.00X145	E1450	7	145	0.276	5.709
7.00X150	E1500	7	150	0.276	5.906
7.00X155	E1550	7	155	0.276	6.102
7.00X160	E1600	7	160	0.276	6.299
7.00X165	E1650	7	165	0.276	6.496
7.00X170	E1700	7	170	0.276	6.693
7.00X172.5	E1725	7	172.5	0.276	6.791
7.00X175	E1750	7	175	0.276	6.89
7.00X177.5	E1775	7	177.5	0.276	6.988
7.00X180	E1800	7	180	0.276	7.087
7.00X182.5	E1825	7	182.5	0.276	7.185
7.00X185	E1850	7	185	0.276	7.283
7.00X185.7	E1875	7	185.7	0.276	7.311
7.00X190	E1900	7	190	0.276	7.48
7.00X195	E1950	7	195	0.276	7.677
7.00X200	E2000	7	200	0.276	7.874
7.00X203	E2030	7	203	0.276	7.992
7.00X206	E2060	7	206	0.276	8.11
7.00X212	E2120	7	212	0.276	8.346
7.00X218	E2180	7	218	0.276	8.583
7.00X224	E2240	7	224	0.276	8.819
7.00X230	E2300	7	230	0.276	9.055
7.00X236	E2360	7	236	0.276	9.291
7.00X239	E2390	7	239	0.276	9.409
7.00X243	E2430	7	243	0.276	9.567
7.00X250	E2500	7	250	0.276	9.843
7.00X254	E2540	7	254	0.276	10
7.00X258	E2580	7	258	0.276	10.157
7.00X261	E2610	7	261	0.276	10.276
7.00X265	E2650	7	265	0.276	10.433
7.00X268	E2680	7	268	0.276	10.551
7.00X272	E2720	7	272	0.276	10.709
7.00X276	E2760	7	276	0.276	10.866
7.00X280	E2800	7	280	0.276	11.024
7.00X283	E2830	7	283	0.276	11.142
7.00X286	E2860	7	286	0.276	11.26
7.00X290	E2900	7	290	0.276	11.417
7.00X295	E2950	7	295	0.276	11.614
7.00X300	E3000	7	300	0.276	11.811
7.00X303	E3030	7	303	0.276	11.929
7.00X307	E3070	7	307	0.276	12.087
7.00X311	E3110	7	311	0.276	12.244
7.00X315	E3150	7	315	0.276	12.402
7.00X320	E3200	7	320	0.276	12.598
7.00X325	E3250	7	325	0.276	12.795
7.00X330	E3300	7	330	0.276	12.992
7.00X335	E3350	7	335	0.276	13.189
7.00X340	E3400	7	340	0.276	13.386
7.00X345	E3450	7	345	0.276	13.583
7.00X350	E3500	7	350	0.276	13.78
7.00X355	E3550	7	355	0.276	13.976
7.00X360	E3600	7	360	0.276	14.173
7.00X365	E3650	7	365	0.276	14.37
7.00X370	E3700	7	370	0.276	14.567
7.00X375	E3750	7	375	0.276	14.764
7.00X379	E3790	7	379	0.276	14.921
7.00X383	E3830	7	383	0.276	15.079
7.00X387	E3870	7	387	0.276	15.236
7.00X391	E3910	7	391	0.276	15.394
7.00X395	E3950	7	395	0.276	15.551
7.00X400	E4000	7	400	0.276	15.748
7.00X406	E4060	7	406	0.276	15.984
7.00X412	E4120	7	412	0.276	16.22
7.00X418	E4180	7	418	0.276	16.457
7.00X425	E4250	7	425	0.276	16.732
7.00X429	E4290	7	429	0.276	16.89
7.00X433	E4330	7	433	0.276	17.047
7.00X437	E4370	7	437	0.276	17.205
7.00X443	E4430	7	443	0.276	17.441
7.00X450	E4500	7	450	0.276	17.717
7.00X456	E4560	7	456	0.276	17.953
7.00X462	E4620	7	462	0.276	18.189
7.00X466	E4660	7	466	0.276	18.346
7.00X470	E4700	7	470	0.276	18.504
7.00X475	E4750	7	475	0.276	18.701
7.00X479	E4790	7	479	0.276	18.858
7.00X483	E4830	7	483	0.276	19.016
7.00X487	E4870	7	487	0.276	19.173
7.00X493	E4930	7	493	0.276	19.409
7.00X500	E5000	7	500	0.276	19.685
7.00X508	E5080	7	508	0.276	20
7.00X515	E5150	7	515	0.276	20.276
7.00X523	E5230	7	523	0.276	20.591
7.00X530	E5300	7	530	0.276	20.866
7.00X538	E5380	7	538	0.276	21.181
7.00X545	E5450	7	545	0.276	21.457
7.00X553	E5530	7	553	0.276	21.772
7.00X560	E5600	7	560	0.276	22.047
7.00X570	E5700	7	570	0.276	22.441
7.00X580	E5800	7	580	0.276	22.835
7.00X590	E5900	7	590	0.276	23.228
7.00X600	E6000	7	600	0.276	23.622
7.00X608	E6080	7	608	0.276	23.937
7.00X615	E6150	7	615	0.276	24.213
7.00X623	E6230	7	623	0.276	24.528
7.00X630	E6300	7	630	0.276	24.803
7.00X640	E6400	7	640	0.276	25.197
7.00X650	E6500	7	650	0.276	25.591
7.00X660	E6600	7	660	0.276	25.984
7.00X670	E6700	7	670	0.276	26.378
search	search	search	search	search	search

Need NF T 47-501 O-rings in the right compound?

Send your size, cross-section or drawing — our engineers confirm the material, precision class, inspection grade and a path to production, usually within one business day.

Request a Quote →

NF T 47-501 French Metric O-Ring Sizes & Tolerances

Using the NF T 47-501 chart to spec your metric O-ring

NF T 47-501 Metric O-Rings

NF T 47-501 Size Chart

Need NF T 47-501 O-rings in the right compound?

Request for Quote

We Are Just a Call Away!