This is a terpolymer of ethylene, propylene and a diene monomer. It has outstanding resistance to oxygen, ozone, and sunlight. Its resistance to polar materials such as phosphate esters, many ketones and alcohol. It has good electrical properties, low temperature flexibility, excellent heat, water and steam resistance. Its resistance to petroleum products is poor. Useful temperature range is -58° F to +300° F (-50° C to +150° C).

This is a copolymer of acrylonitrile and butadiene. It has excellent physical properties, however its claim to fame is based on its resistance to water, petroleum products and fuels. When compounded properly, it has good low temperature properties as well as good heat resistance. It does not have good ozone, oxygen or sunlight resistance without the addition of special additives. Useful temperature range is -40° F to +275° F (-40° C to +135° C).

This elastomer is made by the polymerization of Chloroprene. It has excellent physical properties. It is moderately resistant to petroleum products, sunlight, ozone and heat. It is flame resistant and will not support combustion. Useful temperature range is -40° F to +275° F (-40° C to +135° C).

This elastomer is made by the polymerization of Chloroprene. It has excellent physical properties. It is moderately resistant to petroleum products, sunlight, ozone and heat. It is flame resistant and will not support combustion. Useful temperature range is -40° F to +275° F (-40° C to +135° C).

This is a copolymer of styrene and butadiene. It has similar properties to natural rubber. Its resistance to solvents and petroleum products is about the same as natural rubber. Water resistance is better. Without special additives, it is vulnerable to ozone, oxygen and sunlight. Useful temperature range is -67° F to +180° F (-55° C to +82° C).

Silicone is made from sand and alkyl or aryl halides. It is predominately inorganic material. It has outstanding resistance to temperature extremes. It has excellent vibration damping, and reasonable physical properties such as tensile and elongation. Tear and abrasion resistance are generally poor. Useful temperature range is -148° F to +600° F (-100° C to +315° C).

This is a synthetic fluoropolymer of tetrafluoroethylene and is known for being one of the most versatile plastics available. It is made by the free-radical polymerisation of many tetrafluoroethene molecules, and is suitable for a wide range of applications in industries as diverse as aerospace, the food and drink industry, pharmaceuticals and telecoms. PTFE is commonly known as Teflon™ (owned by Chemours) and offers remarkable nonstick properties in cookware applications such as kitchen pans and baking trays. PTFE is produced by AFT Fluorotec in rods or tubes of any size, or filled with glass, carbon, stainless steel or many other materials to increase wear resistance and strength, whatever your project or build, we are sure to have a material that will work for you.

FFKM are one of the most expensive elastomers. Typical applications include core sleeves, gaskets, O-rings in chemical processing equipment for applications where the parts are exposed to harsh environments and high temperatures. Some grades are suitable for continuous use at 325°C (620°F), with chemical resistance being almost universal and unrivaled by any other elastomer. Applications – Chemical and hydrocarbon processing, semiconductor manufacturing, aerospace engines, FDA-compliant food, pharmaceuticals and beverages.

A unique elastomer. It can be produced from conventional nitrile rubber by hydrogenation of the unsaturated bonds in the butadiene units of the polymer. The properties of hydrogenated nitrile rubber (HNBR) depend upon the acrylonitrile content and the degree of hydrogenation of the butadiene copolymer. HNBRs have better oil and chemical resistance than nitrile rubbers & can also withstand much higher temperatures. Like NBR, this type of elastomer has excellent resistance to oils and fuels but it also has excellent resistance to many chemicals, heat (steam / hot water) & ozone. The mechanical properties like tensile & tear strength, elongation, & abrasion resistance are also excellent. Furthermore, HNBRs have good dynamic behavior at elevated temperatures. Disadvantages include higher cost & limited resistance to aromatic oils & polar organic solvents, poor electrical properties, & poor flame resistance. The typical working temperature range is -25°C to +160°C (-40°F to +320°F). Special grades that are sulfur or peroxide cured have improved dynamic applications but also have a lower maximum application temperature. As with nitrile, many properties can be influenced by varying the acrylonitrile content in the rubber. High-nitrile HNBR elastomers have better resistance to mineral oils, whereas peroxide/sulfur cured HNBRs have the best compression set and heat resistance.

AFLAS is a unique fluoroelastomer that has superior amine resistance & electrical insulation compared to conventional fluoroelastomers. It is highly suitable for critical applications where exceptional reliability is required. The molecular structure of AFLAS® gives it outstanding heat-resistance allowing it to be used continuously at 200°C. Its exceptional heat-resistance even enables it to withstand temperatures of 250°C. It has extremely low aromatizing properties compared to other rubber materials. It can be considered extremely effective for use in gaskets and packing on piping components for production lines, where lingering or transferred smells are a concern.